Turning StatusControl notifications on and off

Use these instructions when setting up your StatusControl notifications for the first time and when editing them afterwards.
  1. Sign into the StatusControl portal at https://statuscontrol.demagcranes.com.
  2. Access your user profile top right and select Notification Settings.

  3. Use the check box to select whether to receive StatusControl notifications or not.
    • To turn off all StatusControl notifications (from all customers, locations, and cranes), de-select the check box. Save with Apply changes. Skip the rest of the steps.
    • To turn on StatusControl notifications, select the check box. Do the rest of the steps.
    StatusControl notifications are sent to your work email address (cannot be changed).
  4. Select the customer and location of the assets (cranes) from which you want to get StatusControl notifications.
    You can select many customers and locations at a time, or proceed one by one.
  5. Scroll down to StatusControl Notifications.
    • If you see an error message saying LOCATIONS NOT FOUND: The customer structure is not complete in Siebel. StatusControl notifications can be set up only if there is at least one location. Contact your local StatusControl key user.
    • If you see an error message saying ASSETS NOT FOUND: StatusControl notifications are not available for all types of cranes/hoists. An additional requirement is that the hoist has a suitable router or gateway for StatusControl data transfer and that the router or gateway has been activated. Consult your local StatusControl key user.
    • If locations and assets are ok, you see a table that shows your current notifications settings. If you have not edited your notification settings before, all check boxes are empty by default. Proceed with the rest of the steps.
Editing your notification settings at the customer or location level
  1. If you want to edit your notification settings collectively for all assets of a particular customer or location, use the check boxes in this table.
    The table rows present the selected customers, with the selected locations below the customers. The columns reflect the StatusControl notification types. For more information, see StatusControl notification types.

    Check box statusMeaning

    		StatusControl notifications are on

    		StatusControl notifications are off

    		Some StatusControl notifications for this customer, location, or notification type are on and some are off
  2. Once done, apply your changes.

Editing your notification settings at the asset level
  1. If you want to edit your notification settings at the asset level (crane by crane), start by selecting the arrowhead button of the location.

    A new table opens up, with the table rows now reflecting the assets of the selected location and the columns presenting the StatusControl notification types.
  2. Open the notification details of the asset with the arrowhead button.
  3. Using the check boxes, select which StatusControl notifications you want to get from the asset.
    The following screenshot is an example for a crane with a Demag DMR hoist.

    For instructions about custom notifications, see Creating custom notifications.
  4. If you need detailed descriptions of the StatusControl notifications, select the info button.

  5. Once done, apply your changes.

  6. Go back to the customer/location level table by scrolling up and selecting Back top left.
    Any edits that you made at the asset level are automatically reflected at the customer/location level, if applicable.
  7. To exit your user profile, select the Back button again.
You now start getting StatusControl notifications from the selected assets to your email.